N a i l i n g  P a t t e r n s  -  3 - T a b  S h i n g l e s

4 NAILS PER SHINGLE

Nails should be located within 1/2" of the nail line. Nails on the ends should be 1" in from the edge.

6 NAILS PER SHINGLE

To be used in manufacturer designated high wind areas, but if you regularly have winds exceeding 60 mph, then this nailing pattern is highly recommended. Note the placement of the nails. One to either side of the "throat" or "cutout".

Please note that the manufacturer's nail placement requirements may differ slightly.

Contents of this site copyright ©1998-2006 RoofHelp.com. All rights reserved.
Hosting, support and assistance provided by Superset.com